Main production process of the raw boards for the further processing.
The process consists of the following steps:
Objects:
Main structures — steel frame of columns and beams. External walls — RC precast sandwich panels. Foundation — in-situ pile caps and foundation beams with the RC precast driven piles. Press pit foundation — in-situ RS foundation slab with the RC precast driven piles. Floor slab — in-situ RC ground bearing slab. Pits and electrical manholes — in-situ RC; Pedestals and piers for equipment and conveyors — in-situ RC.
Object: Forming line
Location: Kronospan OSB Factory. Production Area.
Function: Forming, pre-pressing, preparation for pressing, transportation.
Forming line length — 75m.
Description: Equipment installed on in-situ RC pedestals with the foundation of in-situ RC ground bearing slab.
Equipment:
CLANCY ENGINEERING has completed design of the project stages as follows:
Objects of design:
Object: Pressing line
Location: Kronospan OSB Factory. Production Area.
Function: Pressing, transportation to finishing line.
Press type — Multi-daylight hot-press;
Number of daylights — 16;
Number of cylinders — 6;
Depth of the press pit — 7.5m;
Length of the press pit — 56m;
Width of the press pit — 11m.
Description: Sheet piling due to lower level of the press pit.
Equipment installed on in-situ RC wall, piers and pedestals with the foundation of in-situ RC foundation slab and RC precast driven piles.
Pits and trenches — In-situ RC.
Press equipment:
CLANCY ENGINEERING has completed design of the project stages as follows:
Objects of design:
Clancy Engineering - Designing the Future!
Similar projects
Kronospan factory / Egoryevsk
Workshop Facility / Egoryevsk
HI-LEX Factory / Samara
2011 | 3600 м2 |